Scorpion Setup - Helis

Gaui Hurricane 550

Pilot: Georges - Scorpion Founder

• Scorpion HK-3026-1900 Kv Brushless Outrunner
• Scorpion HV Brushless ESC
• 25C 4-cell 3700mah Lipo for Normal Aerobatics
• 25C 5-cell 3700mah Lipo for Crazy 3D Flight
• 13-Tooth Pinion
• "Flight Time on 5S Lipo is 5 Minutes Hard 3D Flight"
• "Flight Time on 4S Lipo is 9 Minutes Normal and Hovering"

Align T-Rex 450SE V1

Pilot: Ed in Oregon

• Scorpion HK-2221-12 Brushless Outrunner
• Align 35A ESC
• 13-Tooth Motor Pinion Gear
• Thunder Power 15C 4-cell 2100mah Lipo
• Radix 325mm Main Blades
• Spektrum AR6000 Receiver
• 3 Hitec HS-56 Servos, 1 JR 3400G Tail Servo
• Futaba GY401 Gyro
• Crazy performance with long run times

Copter-X 450 V2

Pilot: RC Dude

• Scorpion HK-2221-8 Brushless Outrunner
• Scorpion 55A Brushless ESC
• 11-Tooth Motor Pinion Gear
• 3-cell 2100mah Align Lipo
• Align 325mm Night Blades (lighted)
• Berg 7 Receiver
• 3 Waypoint 092MG Servos, 1 Hyperion DS12 Tail Servo
• Align Gyro
• Yes, that's training gear! Still learning.

Esky Honeybee CP2

Pilot: John in Ohio

• Main Rotor 21"
• Flying Weight 11.3oz
• Scorpion HK-2208-34 Brushless Outrunner
• Scorpion 15A Brushless ESC
• 3-cell 1000mah Esky Lipo
• 11-Tooth Pinion Gear
• Esky 6 channel Receiver
• 4 Esky 8g Servos

T-Rex 450XL V1

Pilot: Big Al in New Mexico

• Main Rotor 325mm Radix Blades
• Flying Weight 30oz
• Scorpion HK-2221-10 Brushless Outrunner
• Castle Creations Phoenix 35A Brushless ESC
• Dimension Engineering VHVBEC
• 4-cell 1800mah Kong Power Lipo
• 13-Tooth Pinion Gear
• 535 watts
• 3 Hitec HS-65HB Servos - 1 Futaba S9257 Servo

Hirobo EVO 90 E-Conversion

Pilot: Big Al in New Mexico

• Main Rotor 690mm Radix Blades
• Flying Weight 144oz
• Scorpion HK-4035-560 Brushless Outrunner
• Castle Creations HV85A Brushless ESC
• Dimension Engineering VHVBEC
• 2 6-cell 3200mah Kong Power Lipos in series for 12S
• 10.55:1 Gear Ratio
• 3700 watts peak
• 3 Futaba S9451 Servos - 1 Futaba S9256 Servo Tail